Mycoplasma-Off™

36,30158,40

Clear
  • 100% Satisfaction Guaranteed
  • Questions? 1-908-524-4661 or Contact Us
  • Questions? +49 30 2000 4370 or Contact Us

Description

Mycoplasma-Off™ is used for cleansing and disinfection of all laboratory surfaces and apparatus, including clean benches, incubators, work benches, cell storage boxes and liquid nitrogen containers from mycoplasma contamination.

Benefits

Rapid

Mycoplasma-Off™ affects mycoplasma immediately. Within seconds mycoplasma are completely eradicated.

Non-corrosive and non-carcinogenic

Mycoplasma-Off™ is an alcohol-based, non-corrosive and non-carcinogenic solution.

Broad spectrum of antimicrobial activity

Bactericidal, fungicidal, and virucidal! Mycoplasma-Off™ is outstandingly safe in use. It possesses not only a strong mycoplasmacidal activity but was also found to be effective against Staphylococcus aureus, Enterococcus hirae, Escherichia coli, Proteus mirabilis, Pseudomonas aeruginosa, Candida albicans, BVD-, Polio, Adeno-, Polyoma SV40- and MNV (Noro)- and vaccinia viridae.

Convenient and ready-to-use

Mycoplasma-Off™ is a ready-to-use solution supplied in a refillable spray bottle. The use of Mycoplasma-Off™ is fast, easy and ideal to maintain a clean work area.

Recommended Use / Scope

Applicable in research and industry only. Not recommended for clinical applications. Use as directed. Always test a small area first for stability and coloration. Mycoplasma-Off™ should not be used on alcohol sensitive surfaces like acrylic and fiberglass.

Kit Components

Ready-to-go formulation in a spray bottle or refill bottles.

Package Sizes
  • Cat. No. 15-1000 1 litre
    Cat. No. 15-5000 5 litre refill bottle
Required Consumables

Paper towels

Required lab devices

none

Shelf Life and Storage

Stable at room temperature for at least 12 months.

Additional information

We have a problem with our incubator. Something keeps growing inside our incubators. Can you give us suggestion how to clean and control this problem, please.

We like to suggest the following procedure:1. Remove all racks and trays and clean them in a dish washer.2. Switch off the incubator and let it cool down. Spray the inside of incubator wet with Mycoplasma Off or wipe it off with Mycoplasma Off Wipes or any other disinfectant containing alcohol >56 % (v/v) and glutaraldehyde. Let it air dry. Keep the door open for evaporation for at least 1 hour or preferably overnight. If your incubator is equipped with a heat inactivation procedure, start this procedure instead. Keep the racks and trays inside. Don´t forget to remove the CO2 sensor if necessary.3. If your incubator is equipped with a copper inlay, do not polish the interior. Copper oxide is bacteriostatic. Polishing will remove this coating.4. Reload the incubator. Use aqua dest. for the pan and add WaterShield.5. For general operation, use plastic trays underneath your culture flasks to avoid spills during loading/unloading.6. Use culture flasks with vent filters and keep the caps tight instead of standard flasks with open caps.